GalvaDock
GalvaDock

 

 

 

 


Galv-A-Dock Dock Brackets

 

The Sectional Dock Bracket, (for 42" wide decking) consists of 1-1/2" and 2" pipe, with bracketing for use of the modified 55-gallon steel barrel (flotation support) for the above water free method of installation and removal. The Galv-A-Dock bracket is hot dipped galvanized, for added years of life. The End Sectional Bracket is equipped with 4 pre-greased 1/2" diameter by 1" long square head set screws, installed in the nuts on the 2" pipe sleeves for locking the framework pipe to the dock bracket. It weighs 23 lbs.

The Continuous Sectional Dock Bracket, is equipped with 6 pre-greased 1/2" diameter by 1" long square head set screws, and weighs 26 lbs.

 

The Platform Dock Bracket (for 62" wide decking) consists primarily of a 2" pipe with bracketing for use of a modified 55-gallon steel barrel, (flotation support) for the above water free method of installation and removal. It is hot dipped galvanized for added years of life. The End Platform Bracket is equipped with 5 pre-greased 1/2" diameter by 1" long square head set screws, installed in the nuts, on the 2" pipe sleeves for locking the 1-1/2" framework pipe to the platform bracket. The Galv-A-Dock Platfom Dock Bracket weighs 37 lbs.

The Continuous Platform Bracket is equipped with 8 pre-greased 1/2" diameter by 1" long square head set screws, and weighs 41 lbs.

The Sundeck Dock Bracket, (84" wide deck surface, with two 42" wide decks, side by side) consists of 2" pipe with bracketing, to use of two servicing barrels, (flotation support) for the above water free method of installation and removal. The Galv-A-Dock Sundeck Bracket is hot dipped galvanized for added years of life.

The End Sundeck Bracket is equipped with 4 pre-greased 1/2" diameter by 1" long square head set screws, installed in the nuts, on the 2" pipe sleeves. These are used for locking the 1-1/2" framework pipe to the sundeck bracket. Two 5/16" diameter x 3/4" long carriage bolts, are used to attach the Sundeck C-Channel, to the sundeck C-Channel bracketing. The Sundeck End Bracket weighs 44 lbs.

The Continuous Sundeck Bracket is equipped with 6 pre-greased 1/2" diameter by 1" long square head set screws, installed in the nuts, on the 2" pipe sleeves. These are used for locking the 1-1/2" framework pipe to the sundeck continuous bracket. Two 5/16" diameter x 3/4" long carriage bolts, are used to attach the Sundeck C-Channel, to the sundeck C-Channel bracketing. The Sundeck Continuous Bracket weighs 46 lbs.

The Super Sundeck Dock Bracket (124" wide decking surface, with 2 - 62" wide decks, side by side) consists of primarily 2" pipes with bracketing to use with two servicing barrels (flotation support) for above water free method of installation and removal. The Super Sundeck Dock Bracket is hot dipped galvanized for added years of life.

The End Super Sundeck Bracket is equipped with 6 pre-greased 1/2" diameter by 1" long square head set screws, installed in the nuts, on the 2" pipe sleeves, for locking the 1-1/2" framework pipe. Two 5/16" diameter x 3/4" long carriage bolts, are used to attach the Sundeck C-Channel, to the sundeck C-Channel bracketing. The Super Sundeck End Bracket weighs 59 lbs.

The Continuous Super Sundeck Bracket is equipped with 10 pre-greased 1/2" diameter by 1" long square head set screws, installed in the nuts, on the 2" pipe sleeves for locking the 1-1/2" framework pipe. Two 5/16" diameter x 3/4" long carriage bolts, are used to attach the Sundeck C-Channel, to the sundeck C-Channel bracketing. The Super Sundeck Continuous Bracket weighs 61 lbs.